GDT:Position
From F4 Wiki
More actions
Revision as of 18:47, 14 January 2026 by Admin (talk | contribs) (Created page with "{{GDT Infobox |symbol=Position |type=Location |category=Location |standard=ASME Y14.5 |author=Admin |datums=A|B|C |modifiers=MMC, LMC, RFS |tolerance_zone=Cylindrical zone |mistakes=Missing datums, wrong modifier |related=F4:Position Validation }} == Definition == Short definition of the control. == When to use == Explain the design/inspection scenario. == How to specify == Describe the feature control frame and datums. == Examples == {{GDT Example...")
| Symbol | Position |
|---|---|
| Type | Location |
| Category | Location |
| Standard | ASME Y14.5 |
| Author | Admin |
| Datums | A |
| Modifiers | MMC, LMC, RFS |
| Tolerance zone | Cylindrical zone |
| Image | |
| Common mistakes | Missing datums, wrong modifier |
| Related | F4:Position Validation |
Definition
Short definition of the control.
When to use
Explain the design/inspection scenario.
How to specify
Describe the feature control frame and datums.
Examples
Example: Simple position callout
Feature control frame with MMC applied to a hole pattern.
Common mistakes
- Missing datum references
- Misapplied modifier